Product ID:PRO STICK 235
MSDS Date:07/27/1987
FSC:8040
NIIN:00N059831
MSDS Number: BXQWF

Emergency Phone: 603-926-1616

Info Phone: 603-926-1616

Cage: ADHES

Telephone: 206-872-2240

Cage: ADHES

NON-HAZARDOUS INGREDIENTS

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE - SOME INDIVIDUALS MIGHT FIND
THE ODOR FROM THE MOLTEN HOT MELT TO BE OBJECTIONABLE.

First Aid:SKIN: MOLTEN HOT MELT WILL ADHERE TO & BURN SKIN UPON
CONTACT. IMMEDIATELY IMMERSE AFFECTED AREA IN COLD/ICE WATER, DO
NOT PULL SOLIDIFIED MATERIAL OFF. SEEK MED AID. INHAL: REMOVE TO
FRESH AIR. SUPPO RT BREATHING(GIVE O*2/ARTF RESP).EYE: FLUSH
W/POTABLE WATER FOR AT LEAST 15 MINUTES. SEE MD. SKIN: FLUSH
W/COPIOUS AMOUNTS OF WATER. SEE MD.

Flash Point:>450F,>232C
Extinguishing Media:CARBON DIOXIDE, FOAM, ETC.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:NORMAL HOUSEKEEPING & CLEAN UP. NO SPECIAL
PROCEDURE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN COOL, DRY AREA.
Other Precautions:EYE OR THROAT IRRITATION FROM MOLTEN HOT MELT SMOKE
MIGHT OCCUR IN CONFINED AREAS. VENTILATION IS RECOMMENDED FOR THESE
CONDITIONS.

Respiratory Protection:NOT REQUIRED IN NORMAL USE CONDITONS. USE
NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN.
Ventilation:LOC EXHST: RECOMMENDED IN CONFINED AREAS. MECH(GENL):
RECOMM FOR LARGE VOLUME USAGE.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS.
Other Protective Equipment:WHERE BURNS FROM MOLTEN MATL COULD OCCUR,
COVER SKIN, LONG SLEEVE SHIRT.
Work Hygienic Practices:ALWAYS KEEP WORK AREA CLEAN & ORGANIZED.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Melt/Freeze Pt:M.P/F.P Text:185F,85C
Vapor Pres:NIL
Spec Gravity:0.97 (H*2O=1)
Solubility in Water:NIL
Appearance and Odor:TRANSLUCENT TO TRANSPARENT, CLEAR, MELTS TO
SEMI-LIQUID ABOVE 250, MILD ODOR.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:CHECK W/STATE, LOCAL & FEDERAL REGULATIONS FOR
PROPER DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.